Home Page

contact us

Steel Sheet Pile Steel Plate Steel Pipe Steel Profiles
        Navigation:  Home>>Steel Pipe >> Galvanized Seamless Steel Pipe
    
Galvanized Seamless Steel Pipe

Galvanized Seamless Steel Pipe

Classification of galvanized seamless pipe


Galvanized seamless pipe is divided into cold-plated steel seamless pipe and hot dip seamless pipe.

Hot dip seamless pipe


The Redu seamless pipe is to make the molten metal and iron substrate reaction, the alloy layer, so that the substrate and coating combination of both. Hot-dip galvanizing is the first steel pickling, in order to remove the steel pipe surface of iron oxide, pickling, aqueous solution of ammonium chloride or zinc chloride or ammonium chloride and zinc chloride mixed aqueous solution tank cleaning, and then send into the hot dip tank. Hot dip galvanized coating uniformity, strong adhesion, and long life.

Cold-plated seamless pipe

Cold galvanized, electro-galvanized, galvanized the amount of small, only 10-50g/m2 of its own resistance to corrosion than hot dip galvanized pipe a lot of difference. Regular galvanized pipe manufacturers, in order to ensure the quality, most do not use electro-galvanized (cold-plated). Only those small-scale, outdated equipment and small businesses with electric galvanized, of course, their prices are relatively cheap. The Ministry of Construction has formally below, cold galvanized pipe to eliminate backward technology, the future not be allowed to cold galvanized pipe for water, gas pipes.

Galvanized seamless mechanical properties

The mechanical properties of steel is to ensure that an important indicator of the steel end-use properties (mechanical properties), it depends on the chemical composition and heat treatment of steel. Steel standards, according to different requirements, the provisions of the tensile properties (tensile strength, yield strength or yield point elongation) and hardness, toughness, user requirements, high and low temperature performance.

Quality Standard of Seamless Steel Pipe:


API 5L Standard Specification for Seamless Line Pipe or Seamless Pipe Line
ASTM A 53 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
ASTM A519 Seamless Carbon and Alloy Steel Mechanical Tubing
ASTM A106 Seamless Carbon Steel Pipes for oil pipeline and gas pipeline transportation
GB/T8162 Seamless Steel Tubes for Structural Purposes
JIS G3441 Alloy steel tubes for machine purposes
JIS G3444 Carbon steel pipes for general structural purposes
JIS G3445 Carbon steel tubes for machine structural purposes
DIN 2391 Seamless Precision Steel Tubes
EN10305 Steel tubes for precision applications. Technical delivery conditions. Seamless cold drawn tubes
EN 10210:Seamless structural steel pipes

Steel Grade of Seamless Steel Pipe:

API 5L: Grade A, Grade B, X42, X46, X52, X56, X60, X65, X70, X80
ASTM A 53: Grade A, Grade B, Grade C, Type F, Type E
ASTM A519: 1010-1045, 4130-4142, 5135
GB/T8162: 10, 20, 35, 45, 16Mn, 12C rMo, 15CrMo, 12C rl MoV
JIS G3441: SCM 415 TK, SCM 418 TK, SCM 420 TK, SCM 430 TK, SCM 435 TK, SCM 440 TK
JIS G3444: STKM 11A, STKM 12, STKM 13, STKM 14, STKM 15, STKM 16, STKM 17, STKM 18
STKM 19, STKM 20
DIN 2391: St30Si, St30A1, St35, St45, St52
EN10305: E235, E355
EN 10210: S235JRH; S275J0H, S275J2H; S355J0H, S355J2H; S275NH, S355NH; S275NLH, S355NLH


Size and Specification of Seamless Steel Pipe: 


Outer Diameter:Hot finish: 2" - 30",Cold drawn: 0.875" - 18"

Wall Thickness:Hot finish: 0.250" - 4.00",Cold drawn:0.035" - 0.875"

Length: Random Length, Fixed Length, SRL, DRL

Heat treatment:
Annealed: Bright annealed, , Spheroidize annealed
Normalized, Stress relieved, Cold finished, Quenched and Tempered

Delivery Condition : BKS, NBK,BK ,BKW, GBK(+A), NBK(+N), BK(+C)

Packing:Plastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips

Test:Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield
strength, Elongation), Technical Properties (Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, Impact Test etc), Exterior Size Inspection.

Mill Test Certificate: EN 10204/3.1B



Copyright @ 2010-2016   www.bochimachinery.com  All Rights Reserved.
BOCHI CORPORATION

Add:19F, No. 157, Zhongshan 3 Rd., Yuzhong district, Chongqing, China    
P.C: 400015   TEL:+86-23-86595013  FAX:+86-23-86595013  Email:marine13@bochimachinery.com

Links:   www.bochimachinery.com   |   www.bochimarine.com   |  www.bochiauto.com   |  www.bochihydro.com